background image

17

Operation

Call alert

Your radio can alert you to incoming signal by emitting an audible 
call tone.

Call-Ring tone

You can send a Call-ring tone to other radio users to give 
an alert that you want to communicate with them.

Press the CALL button

You will hear a ring tone for about two seconds; “

TX

” icon 

appears on the LCD screen. Any other units within the 
transmitting range and tuned to the same channel and sub-
channel (if applicable) will hear the Call-ring tone.

Selecting a Call- Ring tone

Your PMR1280 is equipped with 10 different types of Call-Ring 
tones.

a.  Press  the 

MENU

 button 8 times, the “

C A

” icon will 

display and flash on the LCD Screen.

b.  Press the 

UP

 or 

DOWN

 button to select the desired Call-

ring tone. A respective Call- Ring tone sound will be 
played when changing from one tone to another. 

c.  Press the 

PTT

 button to confirm your setting.

Setting the Roger Beep

The Roger beep is a tone which is automatically transmitted 
whenever the PTT button is released. This alerts the receiving party 
to inform you that you have intentionally ended the transmission, 
and you are now in receive mode.

a.  Press the 

MENU

 button 9 times, the “

ON

” icon will flash 

on the LCD Screen.

b.  Press the 

UP

 or 

DOWN

 button to select the Roger beep 

On/Off.

c.  Press the 

PTT

 button to confirm your setting.

Summary of Contents for PMR1280































Reviews: