15
Calling (Paging) Tone
You can use the
CALL
button to send a tone to other users
on the same channel. To activate this feature;
a. With the PMR in normal mode, press and release the
CALL
button. The unit will transmit a 2-second page
tone to the other unit/s set with the same channel within
transmitting range
Channel Scan
Your radio can scan the 80 channels for any activity. This
allows to find other radios without having to change the
channel.
To activate this feature:
a. Press and old the
MENU
and
UP
button at the same time
and channel scanning will start immediately, with SC
displayed on the screen and the channel number cycling
through the channels. When a signal is detected, the unit
will pause on that channel, while receiving the signal and
for a further 3 seconds.
b. Press the
PTT
button to stop scanning and talk on that
channel, press the
UP
or
DOWN
button to manually start
the scanning.
c. To stop scanning, press the
MENU
button and return to
standby mode.
Keypad Lock
With the buttons locked you can still transmit “
TX
”, or call the
current channel, but you can not change the volume. To activate
this feature; In the standby mode, press and hold the
MENU
until
the
icon appears on the LCD screen.
To unlock the Keypad
Press and hold again the
MENU
button until the
icon disappears
on the LCD screen.
Operation
