19
Operation
Key Lock
Press and hold
key for 3 seconds, LCD display
icon.
All keys are locked except PTT and key.
To unlock, press and hold
key for 3 second again.
Scanning Channels
Press the SC/MON key once and LCD will display
and radio will start scanning.
LCD display shows the scanning channel one by one.
It will stop at those channels with signal for a while.
Note: Please aware that the scanning will stop at those
channels with the same CTCSS / DCS as your radio
setting only.
Press
▲
or
▼
key to continue scanning.
Or if you want to use this channel, press PTT to
confirm and your radio will stay on this channel.
If there is no signal, it will continue to scan. Press
SCAN key or PTT to exit Scan function and return to
preset Channel.
Monitor
Press and hold SC/MON key to break the squelch
noise and open (un-squelch) the frequency for monitor
function. Release the SC/MON key to stop.
Summary of Contents for PMR1300
Page 38: ......