background image

3

*Need some help? Call 02 4574 8888 or go to 

www.oricom.com.au

Features

Welcome…

to your TV7400 2.4GHz Amplified Wireless TV Headset

The Oricom Wireless TV Headset is an audio amplification system 
specifically designed for people with hearing difficulties. 

The Oricom Wireless TV Headset can be used with all kinds of audio 
systems for free listening enjoyment. This product can be used on all 
audio devices with a 3.5mm/optical audio output, including all TV's, 
Smartphones, and Hi-Fi systems. Audio output from a TV or audio device 
is transmitted by the Charging Cradle, and the wireless receiver receives 
the signal and amplifies the audio sound for the listener.

Features

•  Comfortable, lightweight and easy to use 
•   Works with all TV’s and audio devices with a 3.5mm/optical audio 

output

•   Integrated microphone on headset to switch to conversation mode 

and increase the ambient sound at the touch of a button 

•  Volume control 
•  Fast charging cradle 
•  RF Transmission auto off (when no audio signal) 
•  Audio balancing (Left/Right) 
•   Adjustable treble and tone clarity 
•  Continuous in use time: Up to 6 hours 
•  Stereo audio input on the base (3.5mm or optical audio cables) 
•  Operating distance of up to 25 metres (in open area) 
•  12 month warranty 

Note: 

Follow the local regulations regarding the disposal of your packing 

materials. Wherever possible, recycle those materials.

This User Guide provides you with all the information you need to get the 

most from your product.

Summary of Contents for TV7400





















Reviews: