18
Instant Memory
To save a channel to Instant memory location Select the channel to be saved
include any CTCSS or DCS settings. Briefly press the power button 2 times then
press and hold the required 'I' button. The buttons have been preprogrammed
with the following I1 CH1, I2 CH12, I3 CH5, I4 CH20, I5 CH40.
Selcall
Selcall or Selective Calling is a function that allows you to selectively call another
radio, using a unique ID number. Your radio has 10 programmable Selcall ID
memories. The ID memories are displayed as "C0 to C9". Here you will program
Selcall ID numbers of other radios.
Your Radio’s Selcall Identification number is preset at "12345".
You must
change this number to your own unique five digit Selcall ID number.
Selcall Identification Name
In addition to the Selcall ID number, each Selcall ID can be named using a 5
character ALPHA name. The ALPHA name is stored in memory along with the
ID code. When an incoming Selcall is received and the Selcall matches one of
those in your radio's memory. The name can be displayed instead of the Selcall
ID number.
Recalling Selcall Idents from Memory
1. Press the
ID/CAL
button to select the
CALL TO
mode.
2. To select the required Identity in memory locations 'C0' to 'C9'. Rotate the
channel knob on the front display of the UHF180F.
3. When the required Selcall Memory is displayed, press and hold the
ID/CAL
button to send TO.
MO / TSQ
ID / CAL
PRI / LO
SC / MEM
F/ DPX
MENU
QUIET
ALPHA
OS / GS
Operations
