17
a. Press the
MENU
button 4 times, “
VOX
” icon will be
displayed and “
OFF
” flashes on the LCD screen.
b. Press the
UP
button to set the VOX sensitivity into
maximum level (the maximum level is “3 ”.) To deactivate
the VOX function, press the
DOWN
button until “OF”
appears on the LCD Screen.
c. Press the
PTT
button to confirm your setting. “
VOX
” will
steadily appear on the LCD Screen as along as the VOX
feature is activated.
VOX operation is not recommended if the radio will be used in a
noisy or windy environment.
Activating the Auto Channel Scan
Channel scan perform searches for active signals in an endless
loop for all 80 channels, 38 CTCSS codes and all 83 DCS codes.
a. Press the
MENU
button 5 times, “
SCAN
” icon will display
on LCD screen.
b. Press the
UP
or
DOWN
button to begin scanning
channels when an active signal is detected, channel scan
pauses on the active channel.
c. Press the
MENU
button six times, CTCSS flashes on
the LCD screen press the
UP
or
DOWN
button to begin
scanning the CTCSS from 1-38.
d. Press the
MENU
button seven times, DCS flashes on
the LCD screen. Press the
UP
or
DOWN
button to begin
scanning DCS code 1-83.
e. Press the
PTT
button to confirm your setting.
Vibrator and Call alert
Your radio can alert you to incoming signal by emitting an audible
call tone and vibration signal.
Operation
OR011253 UHF2190_2195 User Guide_11-07-14.indd 17
2014/11/7 14:31:11