18
Call-Ring tone
You can send a Call-ring tone to other radio users to give
an alert that you want to communicate with them.
Press the CALL button
You will hear a ring tone for about two seconds; “
TX
” icon
appears on the LCD screen. Any other units within the
transmitting range and tuned to the same channel and sub-
channel (if applicable) will hear the Call-ring tone.
Selecting a Call- Ring tone
Your UHF2190/2195 is equipped with 15 different types of Call-
Ring tones.
a. Press the
MENU
button 8 times, the “
C01
” icon will
display and flash on the LCD Screen.
b. Press the
UP
or
DOWN
button to select the desired
Call-ring tone. A respective Call- Ring tone sound will be
played when changing from one tone to another.
c. Press the
PTT
button to confirm your setting.
Activating the Vibrator mode
a. Press the
MENU
button 9 times; “
1
” flashes on the LCD
Screen.
b. Press the
UP
or
DOWN
button to activate the vibrator
function.
c. Press the
PTT
button to confirm your setting.
Note: Vibrator and Call tone can be activated at the same.
Operation
OR011253 UHF2190_2195 User Guide_11-07-14.indd 18
2014/11/7 14:31:11