17
Operations
Priority/Instant Channel
To set Priority/Instant Channel, select the channel you wish to
use as your priority/Instant channel then enter menu function,
select PRI and select ON, Push and hold the menu button to
save your selection. The channel you selected as your Priority
Channel will then be automatically monitored during the Priority
Scan and when INS button is pushed.
Note: You can only store one channel as your priority channel.
Busy channel Lock
If the channel is already in use, you can prevent the UHF CB
radio from transmitting. This is particularly important when using
CTCSS/DCS.
Roger Beep
This function emitts a beep on completition of transmission to
alert the other party that transmission has finisheds.
Key Beep
The Beep tone emits a tone when you press any of the buttons
on the microphone (except PTT button).
Call tone
You can select from 5 call tones this is the tone that is emitted
when the INS/CALL button on the microphone is pushed for 2
seconds.
Current regulations require calling tones to be restricted to one
transmission per minute. If a second transmission is attempted
within one minute then an error tone will sound.
