9
Installation
Installation
CAUTION
When installing your radio in your vehicle, check that during installation you do
not damage any wiring or vehicle components that may be hidden around the
mounting position.
If you are unsure about how to install your radio, we suggest for optimum
performance you have your radio professionally installed by a UHF specialist or
Auto electrician. When installing the radio, avoid mounting it close to heaters or
air conditioners.
Do not press the PTT or CALL button before installing the
antenna.
Screw the mounting bracket and the remote head bracket to firm surfaces.
Fitting the controller Microphone Speaker
The Remote Head uses an 8 pin telephone style plug and socket:
1. Position the microphone plug so the plastic flap faces downwards, and press
the plug into the socket until it ‘clicks’.
2. Gently press the rubber boot into the hole surrounding the socket so that the
slot around the boot fits neatly inside the rim of the entry hole.
3. If required use the external cable (supplied) to allow the radio to be installed
further from the Controller Speaker Microphone.
UHF380_manual.indd 9
2013-3-8 8:56:13
