Oricore ST-60, User Manual

 
Turning your Oricore ST-60 headset on and off 

Turning on the headset 

Press and hold the MFB for 3 seconds, the LED will turn on in blue and you will hear a beep, that is to say the 

headset has been turned on. 

Turning off the headset 

Press and hold the MFB for 4 seconds until you hear a long beep, the LED will turn red for 2 seconds, then the LED 

will stop flashing. 

Turning the built-in buzzer on and off 

Turning on the built-in buzzer 

Press and hold the next track key for 5 seconds until you hear a long beep. 

Note The built-in buzzer is set to “on ”. 

Turning off the built-in buzzer 

Press and hold the next track key for 5 seconds until you hear two short beeps. 

Now, when there is an incoming call, the ringing tone will only be heard through the earphone. 

Note: This function varies with the mobile phones. If connected with the music from the mobile 

phones which supporting Bluetooth A2DP profiles, you will hear no beep from the built-in buzzer, 

however, you can have a ringing tone from the headset.    If connected with a single track mobile 

phone, the built-in buzzer keeps normal. 

- 8 -

第

 8 

页

共

 18 

页