Turning Your Headset On and Off
Turning On the Headset
Press and hold the MFB
(see figure 1)
for
5
～
6
seconds until you hear a short beep. The display will prompt
”ST-66
pairing”.
IMPORTANT: Press the MFB again when you want to turn on the headset to headset to re-activate pairing and ensure
the connection between the headset and the mobile phone is resumed. For pairing, please refer to “Pairing Your
Headset”.
Turning Off the Headset
Press and hold the MFB for two seconds until
it shows “power off”
.
IMPORTANT: To disconnect the Bluetooth connection, press the headset’s MFB firmly to turn it off. If you will not be
using the headset for a while, we advise you turn off the Bluetooth function on your mobile phone as well.
Pairing Your Headset
The headset works with Bluetooth-enabled phones
only. Prior to using and pairing your headset for the first
time, please check if your mobile phone is Bluetooth-enabled.
This information will normally feature on the
packaging or user guide that is provided with your mobile phone.
The pairing instructions for typical Bluetooth –enabled
mobile phone are explained on the next page. The headset
pairing procedure may vary depending on the setting of
your mobile phone. Please contact the manufacturer of
your mobile phone or its agent for further information.
