3
Connection cable (sold separately)
To connect the motor and driver, the dedicated connection cable (sold
separately) is required.
The connection cables are provided up to 20 m (65.6 ft.).
Model name and type
Cable outlet direction
F
：
Output shaft direction
B
：
Opposite to output shaft
direction
V
：
Vertical direction
Electromagnetic brake motor
Cable length
005
:
0.5 m (1.6 ft.)
010
:
1 m (3.3 ft.)
015
:
1.5 m (4.9 ft.)
020
:
2 m (6.6 ft.)
025
:
2.5 m (8.2 ft.)
030
:
3 m (9.8 ft.)
040
:
4 m (13.1 ft.)
050
:
5 m (16.4 ft.)
070
:
7 m (23.0 ft.)
100
:
10 m (32.8 ft.)
150
:
15 m (49.2 ft.)
200
:
20 m (65.6 ft.)
Output shaft direction:
CC_____
F
Opposite to output shaft
direction:
CC_____
B
Vertical direction:
CC_____
V
CC 005 KHBL M F
For the round shaft type motor, select the cable outlet direction in
consideration of the installation.
Names of parts
Motor
The figure shows the 120W type motor.
Protective Earth Terminal
Mounting holes
(4 places)
Motor
Gearhead
Output
shaft
Connector for cable
connection
Electromagnetic brake
Connection cable (sold separately)
Connector for
motor connection
Ground terminal
Power connector (white)
Sensor connector (black)
Connectors for driver connection
Electromagnetic brake
connector (white)
Installation
This section explains the installation method of a load in addition to the
installation location and installation method of the product.
Installation location
Install the product in a well-ventilated location that provides easy access for
inspection. The location must also satisfy the following conditions:
•
Indoors
•
Operating ambient temperature: 0 to +40 °C (+32 to +104 °F) (non-freezing)
•
Operating ambient humidity 85% or less (non-condensing)
•
Area that is free of explosive atmosphere or toxic gas (such as sulfuric gas) or
liquid
•
Area not exposed to direct sun
•
Area free of excessive amount of dust, iron particles or the like
•
Area free of excessive salt
•
Area not subject to continuous vibration or excessive shocks
•
Area free of excessive electromagnetic noise (from welders, power machinery,
etc.)
•
Area free of radioactive materials, magnetic fields or vacuum
•
Altitude: Up to 1000 m (3300 ft.) above sea level
•
Area not subject to oil (oil droplets) or chemicals
The motor can be used in an environment where it is splashed with water
(excluding the part of the connectors for driver connection and the mounting
surface of the round shaft type).
However, do not use it under water or in high water pressure.
Installation method
z
Electromagnetic brake motor, combination type-parallel shaft
gearhead
Secure the motor and gearhead through four mounting holes using the
included mounting screw set.
Tighten the screws until no gap remains between the product and mounting
plate.
Mounting screw set
(included)
Motor
Gearhead
(L2)
L1
Model
Gear ratio
Hexagonal socket head
screw
L2
[mm (in.)]
Tightening
torque
[N·m (lb-in)]
Screw
size Material
L1
[mm (in.)]
BLM5120
5
to
20
M8 Stainless
steel
70 (2.76) 11.5 (0.45)
12.0 (106)
30
to
100
85 (3.35) 13.5 (0.53)
200
90 (3.54) 12.5 (0.49)
BLM6200S
5
to
20
85 (3.35) 11 (0.43)
30
,
50
100 (3.94) 14 (0.55)
100
,
200
110 (4.33) 10 (0.39)
