Table of contents
HP-5051-7
Speed Controller
MSC-1
OPERATING MANUAL
Thank you for purchasing an Oriental Motor product.
This Manual describes product handling procedures and safety precautions.
•
Please read it thoroughly to ensure safe operation.
•
Always keep the manual where it is readily available.
1 Introduction ............................... 2
2 Safety precautions .................... 4
3 Precautions for use .................. 5
4 Installation ................................ 6
4.1 Location for installation .................6
4.2 Installation method ........................6
potentiometer (Sold separately) ....7
4.4 Installing and wiring in compliance
with EMC Directive ........................7
5 Connection ............................... 9
5.1 Connection example .....................9
5.2 I/O signals ...................................12
6 Basic operations ..................... 13
6.1 Run/stop ......................................13
6.2 Setting the operating speed ........13
6.3 Setting the acceleration time and
deceleration time .........................14
6.4 2-speed operation .......................14
6.5 Timing chart .................................15
6.6 Multi-motor control ......................15
6.7 Repeated cycle of operation/
instantaneous stop ......................16
6.8 Braking current at instantaneous
stop .............................................16
7 Alarms .................................... 17
8 Inspection ............................... 18
