INPUT POWER: UDX5114NA
115V NOMINAL (104V 10 126V), 50/60 Hz. 3.5 AMPS OR LESS
U
DX
5
·
128NA
115V NOMINAL(104V lo 126V), 50/60 Hz, 7.3 AMPS OR LESS
MOTOR VOLTAGE
162VDC NOMINAL, 180VDC MAXIMUM, PULSE WIDTH MODULATED
INPUT SIGNAL CIRCUIT
220 OHM. 25mA, OPTICALLY ISOLATED. 10 MICROSECOND PULSE WIDTH MINIMUM
INPUT SIGNAL OPTIONS
DIRECTION AND STEP CLOCK (STANDARD), UP/DOWN CLOCK
POV)!ER SAVING f::EATURE
OUTPUT CURRENT AUTOMATICALLY DROPS TO A80UT 50% OF RUNNING CURRENT
AFTER 100 MILLISECONDS AT STANDSTILL. (ADJUSTABLE PERCENTAGE)
AMBIENT TEMPERATURE
o· TO 40· C. (32' TO 104· F.)
DIELECTRIC STRENGTH
UNDER NORMAL AMBIENT TEMPERATURE AND HUMIDITY, SUFFICIENT TO WITH-
STAND 1 KVAC APPLIED BETWEEN CASE AND INPUT TERMINALS FOR ONE MINUTE.
INSULATION RESISTANCE
GREATER THAN IOOM OHMS WITH 500VOC POTENTIAL APPLJED BETWEEN CASE
-
AND TERMINALS.
OVERHEAT PROTECTION
OUTPUT CURRENT IS SHUT OFF AND OVERHEAT INDICATOR LIGHTS WHEN
INTERNAL HEAT SINK TEMPERATURE EXCEEDS 80' C, (SWITCH SELECTABLE
CURRENT SHUT OFF OVERRIDE)
DIMENSIONS:
UDX5114NA
1.6"(W) x 4.2"(0) x 9.S"(H) (40.6mm x 106.7mm x 241.3mm)
UDX5128NA
1.8"(W) x 5.4"(0) x 9.5"(H) (45.7mm x 137.2mm x 241.3mm)
WEIGHT:
UDX5114NA
35.2 oz. (1 Kg)
UDX5128NA
45.8 oz. ( 1
.
3 Kg)
MAX.MOTOR
2.36"<!>
1,4 AMPS/PHASE
WIND. CURRENT
3.39"¢
2.8 AMPS/PHASE
STEP ANGLE ACCURACY
±5 MIN.
DIELECTRIC STRENGTH
UNDER NORMAL AMBIENT TEMPERATURE AND HUMIDITY, SUFFICIENT TO WITH-
STAND 1 KVAC APPLIED BETWEEN CASE AND INPUT TERMINALS FOR ONE MINUTE.
INSULATION RESISTANCE
GREATER THAN 100M OHMS WITH 500VDC POTENTIAL APPLIED BETWEEN CASE
AND LEADS.
INSULATION CLASS
CLASS B (130. C.)
MAX. TEMPERATURE RISE
WITH 5 PHASES
·ow.
(80' C.)
TEMPERATURE RANGE
o· C. TO +so· C., (+32' F. TO +122' F.)
WEIGHT:
2.36"<,i>
PH564-NAA(BA)
=
17.6 oz. (0.5 Kg), PH566·NAA(BA)
a
26.4 oz. (0.75 Kg),
PH569-NAA(BA)
-
45.8 oz. (1.3 Kg)
3.39"¢
PH596H-NAA(BA)
=
52.9 oz. (
1
.
5 Kg).
PH599H·NAA(BA)
=
88.2 oz. (2.5 Kg)
PH5913H-NAA(BA) • 123
.
5 oz. (3.5 Kg)
14