- REC[M] or REC[Q] sign will be indicated in top left corner on the screen , lt mean
you select MUX or QUAD recording .
- 15P sign will be indicated in top right corner on the screen , it mean the recording
speed you selected . 15P means 15 fields per second .
-
sign will be indicated in center corner on the screen .it mean the marked
channel be record ed ..
In Recording Mode ,if there is a power failure or power lost for any reasons that
cause a shut down of this machine ,it will be back to the Recording Mode auto-
matically when power restored .
※
8
3.Playback
Press the
button to into time search .
The following message will be displayed on the screen (The list of MASTER HARD
DRIVE means the time it start and end recorded at this HDD).
PLAY
SEARCH TIME
HDD : MASTER HDD
START TIME
ENDTIME
03/03/03 05:02:54
03/03/03 05 :20:00
> 01 TIME 2003/03/03 05:02:54
Press
button on play video forward .
PLAY sign will be indicated in top left corner on the screen .
MUX or QUAD sign will be indicated in top right corner on the screen , it mean the
recording mode you selected.
Press
button to play video reverse at 6 times speed fast rewind mode .
●
●
PLAY
Rew Search
Press
button to play video forward at high speed .Press the button
F. FwdSearch
Again the speed will change circulative from x2.x4 ,to the highest x6
REW or FF 2/4/6 sign will be indicated in top left corner on the screen .
●
Pause
Press
button to pause (field by field )for forward , This function can
be used in full screen and quad mode (if you choose QUAD in recording mode than it
can't playback in full screen ).
PAUSE sign will be indicated in top left corner on the screen .
●
STOP
Press the
button to leave playback mode and resume the Live Mode .
4. Hard disk recommend
Maximum 2 pieces and at lease one hard disk should be connect , the capacity of hard
disk from 40 GB to 120GB for each .
When you restart the power of this appliance after install or replace new hard disk it
will be format automatically ,we been tested the follow model of hard disk and recom-
mend you use when you install by yourself.
