Primo
Table & Floor Light
E27
GLS
LAMP GUIDANCE
TYPE*
WATTAGE**
Contents
BASE
SHAPE
INCANDESCENT
CFL
ECO-HALOGEN
LED
40W MAX
11W
n/a
7W
Moulded prismatic glass shades sparkle and refract light, providing an even, glare-free illumination
whose tone can be changed dependent on the bulb used. Prismatic pendants provide a great central
lighting source. Choose from the Phane, inspired by a light on the Paris Metro, the Coolie, Optico or
Circus. Prismatic glass wall lights include the Optico, Circus and Mann, in addition to a Primo table
light.
230V ac 50Hz
Assembling Base
Adjusting Shade
IP20
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
1
2
3
- With one hand supporting the shade, gently loosen the
clamp handle (2). One quarter-turn, in an anti-clockwise
direction should be sufficient.
- The shade can then be moved into desired position,
ensuring the clamp remains attached to the stem, but
without applying excessive force to the washers on the
inside of the clamp. Ensure the shade is still supported
whilst adjusting position.
- Secure in place by gently tightening clamp handle,
taking care NOT to overtighten
, as this can damage
the clamp.
- Do not adjust the position of the shade without
loosening the clamp first, as this will damage the
washers.
BALL
A
A
Shade/Stem/Cable Assembly
B Base*
*This will be detached from stem in floor version
A Stem
B Thread
C Coupler
D Base
Place base on a level floor (non-slip surfaces work best during assembly).
STEP 1
Support the stem and shade with both hands, then insert the thread into the coupler on the base. Screw the stem into
the coupler until a tight, firm fit is achieved (the thread should no longer be visible).
STEP 2
B
A
C
B
D
FF463N
Primo Floor Light
FT311
Primo Table Light
