UK-6
TIME
Use the time mode to set and view the current time
and date.
To turn the hourly chime signal ON/OFF:
1. In the Time Mode, press START/STOP button to
turn it on and off. Bell icon indicates the Hourly
Chime signal is ON.
2. If it is ON, the indicator is shown on the
display in all modes.
3. The watch beeps twice every hour on the hour
if it turns on.
To reset the seconds count to zero:
1. Hold down RESET/SPLIT button for 2 sec. Until
the second digits start to flash, which indicates
in setting screen.
2. Press START/STOP button to reset the seconds
count to 00. if the seconds count is in the range
of 30 to 59, the minutes will add by 1 together.
3. Press RESET/SPLIT but
ton to exit the setting
screen.
������������
