Function Setting
功能設定
4
風扇可使用機身頂部的按鍵操控。
1.
將風扇擺放於穩固的平面上，將插頭插入電壓
220-240V
的獨立插座。
2.
開機
(POWER) :
按下開/關鍵
" "
，風扇以
1
檔啟動。
The Fan may be operated by the control panel located on the top of the Fan.
1. Place the Fan on a stable and flat surface. Plug the Power Cord into an a.c. 220-240V
electrical outlet.
2. POWER: Turn the Fan ON by pressing the On/Off key" ", the Fan will start at speed 1.
3.
風速
(SPEED) :
按下風速鍵
" "
，設定所需風速:
8
段風速。
LED
風速顯示燈將會亮起，
並顯示所選風速
:
風速
1
：第一個風速顯示燈半亮
風速
2
：第一個風速顯示燈全亮
風速
3
：第一個風速顯示全亮，第二個風速顯示燈半亮
風速
4
：第一個及第二個風速顯示燈全亮
風速
5
：第一個及第二個風速顯示燈全亮，第三個風速顯示燈半亮
風速
6
：三個風速顯示燈全亮
風速
7
：三個風速顯示燈全亮及第四個風速顯示燈半亮
風速
8
：四個風速顯示燈全亮
3. SPEED: Adjust the Fan speed to the desired level: 8 level wind speed by pressing
Speed key" ". The LED light of speed will be on and indicate the speed level:
Speed 1: First LED light one half light on
Speed 2: First LED light light on
Speed 3: First LED light light on and second LED light one half light on
Speed 4: First LED light and second LED light light on
Speed 5: Two LED light light on and third LED light one half light on
Speed 6: Three LED light light on
Speed 7: Three LED light light on and fourth LED light one half light on
Speed 8: All the LED light light on
4.
左右送風
(OSC) :
按下左右送風鍵
" "
，風扇以自動左右搖擺模式送風。如欲停止自動
左右搖擺模式送風，再按此鍵一次。
4. OSC: Press the OSC key" " to allow the Fan to oscillate the wind direction. To stop
the oscillation, press the key again.
智能直流風扇
AI DC Stand Fan
Speed Key
風速鍵
OSC Key
左右送風鍵
On/Off Key
開關鍵
圖片只供參考
，
一切以實物為準
The picture is for
reference only,
everything in
kind shall prevail.
