IMG-1312-D User’s Manual
server by the method you set (Startup or any character). After the
data has been transferred, device can disconnect automatically from
the server by using the TCP alive check time or Idle timeout settings.
Label
Description
Data Encryption
Use SSL to encrypt data.
Destination Host
Set the IP address of host and the port number of data port. .
Idle Timeout
When serial port stops data transmission for a defined period of time (Idle
Timeout), the connection will be closed and the port will be freed and try to
connect with other hosts. 0 indicate disable this function. Factory default
value is 0. If Multilink is configured, only the first host connection is effective for
this setting.
Alive Check
The serial device will send TCP alive-check package in each defined time
interval (Alive Check) to remote host to check the TCP connection. If the TCP
connection is not alive, the connection will be closed and the port will be freed.
0 indicate disable this function. Factory default is 0.
Connect on
Startup
The TCP Client will build TCP connection once the connected serial device is
started.
Connect on Any
Character
The TCP Client will build TCP connection once the connected serial device
starts to send data.
7. Service Mode – UDP Mode
Compared to TCP communication, UDP is faster and more efficient.
ORing Industrial Networking Corp. 26
Summary of Contents for IDS-1112
Page 5: ......
