IDS-141A_181A Series
User’s Manual
43
ORing Industrial Networking Corp.
only the first host connection is effective for this setting.
Alive Check
The serial device will send TCP alive-check package in each defined time interval (Alive
Check) to remote host to check the TCP connection. If the TCP connection is not
alive, the connection will be closed and the port will be freed. 0 indicate disable this
function. Factory default is 0.
Max Connection
The number of Max connection can support simultaneous connections are 5, default
values is 1.
Table 5-16 Virtual COM mode
*Not allowed to mapping Virtual COM from web
Service Mode
– TCP Server Mode
In TCP Server Mode, DS is configured with a unique Port combination on a TCP/IP
network. In this case, DS waits passively to be contacted by the device. After the
device establishes a connection with the serial device, it can then proceed with data
transmission. TCP Server mode also supports up to 5 simultaneous connections,
so that multiple device can receive data from the same serial device at the same
time.
Figure 5-28 TCP Server Mode
Summary of Contents for IDS-141A
Page 4: ......