IDS-4312(+) Series User Manual
ORing Industrial Networking Corp
41
Label
Description
Data Encryption
Click on the radio button to enable or disable data encryption
Idle Timeout
When serial port stops data transmission for a defined period of
time, the connection will be closed and the port will be freed and
try to connect with other hosts. 0 indicate disable this function.
Factory default value is
0
. If Multilink is configured, only the first
host connection is effective for this setting.
Alive Check
The serial device will send TCP alive-check packages in each
defined time interval to remote host to check the TCP
connection. If the TCP connection is not alive, the connection
will be closed and the port will be freed.
0
indicate disable this
function. Factory default is
0
.
Max Connection
The number of Max connection can support simultaneous
connections are
5
, default values is
1
.
*Not allowed to mapping Virtual COM from web
Service Mode
– TCP Server Mode
In TCP Server Mode, DS is configured with a unique port combination on a TCP/IP network.
In this case, DS waits passively to be contacted by the device. After the device establishes a
connection with the serial device, it can then proceed with data transmission. TCP Server
mode also supports up to 5 simultaneous connections, so that multiple device can receive data
from the same serial device at the same time.
