IDS-5612 Series User’s Manual
ORing Industrial Networking Corp
52.
Figure 5-32 TCP client mode
The following table describes the labels in this screen.
Label
Description
Data Encryption
Use SSL to encrypt data.
Destination Host
Set the IP address of host and the port number of data port. .
Idle Timeout
When serial port stops data transmission for a defined period of time (Idle Timeout), the
connection will be closed and the port will be freed and try to connect with other hosts. 0
indicate disable this function. Factory default value is 0. If Multilink is configured, only
the first host connection is effective for this setting.
Alive Check
The serial device will send TCP alive-check package in each defined time interval (Alive
Check) to remote host to check the TCP connection. If the TCP connection is not alive,
the connection will be closed and the port will be freed. 0 indicate disable this function.
Factory default is 0.
