IES-3082GC User Manual
ORing Industrial Networking Corp.
34
Label
Description
RSTP mode
You must enable or disable RSTP function before configuring
related parameters
Priority (0-61440)
A value used to identify the root bridge. The bridge with the
lowest value has the highest priority and is selected as the
root. If the value changes, you must reboot the switch. The
value must be multiple of 4096 according to the protocol
standard rule.
Max Age Time (6-40)
The number of seconds a bridge waits without receiving
spanning tree protocol configuration messages before
attempting a reconfiguration. Enter a value between 6 through
40.
Hello Time (1-10)
The time that controls switch sends out the BPDU packet to
check RSTP current status. Enter a value between 1 through
10.
Forwarding Delay Time
(4-30)
The number of seconds a port waits before changing from its
Rapid Spanning-Tree Protocol learning and listening states to
the forwarding state. Enter a value between 4 through 30.
Apply
Click to set the configurations
NOTE:
Follow the rule to configure the MAX Age, Hello Time, and Forward Delay Time.
2 x (Forward Delay Time value –1) > = Max Age value >= 2 x (Hello Time value +1)
The following tablet shows RSTP algorithm results.
