49
VCCX2 Controller Technical Guide
12 Relay E-BUS Expansion Module
The ASM01873 12 Relay E-BUS Expansion Module provides
for 12 Dry Contact Configurable Relay Outputs. See
Figure 30,
this page
for complete wiring details.
The 12 Relay E-BUS Expansion Module can be used in
conjunction with the VCC-X EM1 Expansion Module. The
expansion modules can be used individually or together to
provide the required inputs and outputs for your specific
applications.
The expansion modules can be used individually or together
to provide the required inputs and outputs for your specific
applications.
WARNING:
Observe Polarity! All boards must be
wired with GND-to-GND and 24 VAC-
to-24 VAC. Failure to observe polarity
will result in damage to one or more of the
boards. Expansion modules must be wired
in such a way that the expansion modules
and the controller are always powered
together. Loss of power to the expansion
module will cause the controller to become
inoperative until power is restored to the
expansion module.
12 Relay E-BUS
Expansion Module
E-BUS cable connects to
VCCX2 Controller
E-BUS cable connects to
the next Expansion Board
Figure 30: 12 Relay E-BUS Expansion Module Wiring
WIRING
12 Relay E-BUS Expansion Module