background image

 

 

23

Battery Pack Specification 

 

Model DC1000RTXEBM 

DC1500RTXEBM DC2000RTXEBM DC3000RTXEBM 

Used with UPS Models 

1K 

1.5K 

2K 

3K 

Battery Type 

12V 9Ah 

12V 9Ah 

12V 9Ah 

12V 9Ah 

Battery Numbers 

12 

Dimensions(DxWxH) 

380 x 438 x 88 

480 x 438 x 88 

600 x 438 x 88 

Net Weight(kgs) 

17.1 

21.5 

29 

41.2 

NOTE:

 Battery pack should be used with corresponded UPS. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Orion Power Systems Service and Technical Support 

If you have any problems or questions with the UPS, call your local distributor or 
Orion Power Systems technical support at the following telephone number : 
In the United States: 

1-877-385-1654 

Please have the following information ready when you call: 
- Model number and Serial number 
- Description of failure or problem 
- Date of failure or problem 
- Customer contact information and return address   
If repair is necessary, you will be given a Returned Material Authorization 
(RMA) number. The RMA number must appear on the outside of the box 
and on the Bill Of Lading. Original packaging should be used if available.   
Systems that get damaged in transit as a result of improper packaging are 
not covered under warranty. A replacement or repair unit will be shipped, 
freight prepaid for all units under warranty. 

 

NOTE: 

For critical applications, immediate replacement may be available.   

 

 

Summary of Contents for DC1000RT


























Reviews: