OR-7200ED User’s Manual
31
3.2.5.
NETWORK
Under Network menu, Network configuration options for network Address, DDNS, Remote Notification and Transmission can be set up.
3.2.5.1.
MENU > NETWORK > Address
In Address, Information such as Type, IP address, Subnet Mask, Gateway Port and DNS can be set for network connections.
Type
: Select the type of network configuration from: Static IP, DHCP and ADSL(with PPPoE).
IP Address
: Enter IP address using
button.
Subnet Mask
: Enter Subnet Mask using
button.
Gateway
: Enter Gateway using
button.
DNS
: Set up the IP address of the DNS server. If you set up the DNS Server, the domain name of the DVRNS server instead of the IP
address can be used during the DVRNS Server setup.
DNS sever address automatically
: Select this option to get DNS Server Address automatically when use DHCP or PPPoE option.
In Port, Select appropriate port number for external access to the system. The port list shows necessary ports to be opened for each
operation.
Network Port
: Set port for DVR Remote Client.
Web Port
: Set port for Web Remote Client.
RTSP Port
: Set port for Android based devices.
iPhone Port
: Set port for iPhone.
UPnP Option:
By checking the UPnP option, it automatically sets ports on a connected router.
Note
: Router should support UPnP option and if same ports are already being used, DVR displays a message and needs to try other
ranges.
Note
: ID and Password are required in ADSL(with PPPoE) type.
Note
: Default TCP port is 10101 but it can be set from 1500 to 32000 if it is necessary.
3.2.5.2.
MENU > NETWORK > DDNS
In the DDNS, network options for DDNS can be selected.
DDNS
: Dynamic Domain Name Server allows dynamic network connections.
Note
: “dvr-ddns.com” and “www.dyndns.org” offer free registrations for DDNS
service.
Please refer to the appendix for DDNS set up page.
Host Name
: Name the DVR or site where it is located using the virtual keyboard by
pressing
.
ID/Password
: ID and Password are required for Authentication.
Note
: Use ID/Password registered in DDNS.
Note:
Host Name can also be registered automatically without registration from DDNS Server. Just enter Host Name (not duplicated
name) and cancel to check Use ID. After clicking Update button, a message is shown to succeed its status or not.
