User’s Manual OR-7500FD Series
35
Preset feature on PTZ camera can be activated by the Event triggering. When Event occurs, PTZ
moves to the preset position where event and positions are. The above menu shows that sensor
1 is set to activate cameras 1,2,3 and 4. If you click PTZ section, PTZ preset (position) can be set
for cameras in the event of Sensor activation.
PTZ event related preset can be synch only with Sensor/Motion/Video Loss events. If there are
multi events occur to a camera at same time, it takes events in order of Sensor > Motion > Video
Loss.
2-6-2. MENU > EVENT > Motion
In Motion, system provides Motion Detection function. Set Motion Detection using Sensitivity,
View and Area options.
Sensitivity
: Select motion sensitivity from very Low to Very High.
Area
: Define the area for motion detection.
Press Setup under Area to define motions detection areas. The blocks indicate the area where is
defined for motion detection
Select Block
: Use arrow keys to move around a box. Select individual blocks to set motion
zones. Use number keys to select and unselect blocks (When using a mouse, use a left button).
Clear Block
: Deselect all blocks inside a box
Select All
: Select blocks on entire screen.
Clear All
: Deselect blocks on entire screen.
View
: View the appearance of motion zones on screen when motions is detected.
