User’s Manual OR-7500FD Series
53
1-4. Tool Panel
1-4-1. DVR Status
DVR tap shows Video Loss, Motion Detection,
Sensor Detection status of currently connected
remote site. User can activate a remote alarm on
DVR Status options.
Reload
: Refresh the latest DVR status info.
Reset Alarms
: Turn off activated Alarms on
the DVR.
Event Pop-up
: Set event pop up option. A
camera will be displayed in full screen mode in
case of event. Set Pop up duration at Setup >
System > Event Pop-up Duration.
Note
: Event Pop-up will not be activated even it is
checked when DVR status menu is hidden or other
menu options (e.g. PTZ control) are being used.
1-4-2. PTZ
The second tap of Tool Panel is PTZ controller.
Once DVR is connected in Live mode and select
the PTZ view CH, it will display the site info and
activate the PTZ controllers.
Set Preset
: Save PTZ camera’s current
location. Up to 16 Presets can be saved
Move to Preset
: Move PTZ cam based on
the preset settings.