4Ch H.264 hardware codec
- Network DVR
20
CHAP. 5 Setup
5-2. Display Setup
1) VGA Setup
This is setup menu for display on the screen.
If you click ‘DISPLAY SET UP’, then you change setting values for display as shown below.
640X480 / 60Hz
800X600 / 60Hz
1024X768 / 60Hz
1280X1224 / 60Hz
640X480 / 75Hz
800X600 / 75Hz
1024X768 / 75Hz
1280X1024 / 75Hz
DISPLAY SETUP
DISPLAY SETUP
DISPLAY SETUP
DISPLAY SETUP
VGA SETUP
SCREEN DISPLAY
OSD SETUP
ESC
VGA SETUP
VGA SETUP
VGA SETUP
VGA SETUP
RESOLUTION 800 X 600 / 60Hz
DEFAULT ESC
** Please check the resolution range that your VGA monitor supports first before you use VGA monitor.
If you select high resolution such as 1024X768, 1280X1024 on VGA SETUP with VGA monitor that does
NOT support those high resolutions, image display may NOT be seen properly.
VGA SETUP : Sets RESOLUTION for a VGA monitor (TFT LCD or CRT) as shown below.
Default Resolution for VGA is 800x600.
Summary of Contents for SecuBook
