2
Included Parts
Unpack all of the parts and lay them out in your workspace.
Make sure all the parts listed below and shown in Figure 1 are
present. Save the shipping box and packaging material. In the
unlikely event that you need to return the mount, you must use
the original packaging. Initial assembly of the mount is easy and
should take only about 15 minutes.
Parts List
A Tripod
B
Altazimuth arm
C
Accessory tray and leg brace
D
Micro-motion cables
(short and long)
E
Optical tube
F
25mm Plossl eyepiece, 1.25
"
G
10mm Plossl eyepiece, 1.25
"
H
Red dot finder scope
I
45-degree correct-image diagonal
J
Dust cap
K
MoonMap 260 (not shown in Fig. 1)
WARNING:
NEVER look directly at the Sun
through your telescope—even for an instant—
without a professionally made solar filter that
completely covers the front of the instrument,
or permanent eye damage could result. Young
children should use this telescope only with
adult supervision.
Congratulations on your purchase of a quality Orion product. The VersaGo E-Series 90mm
Altazimuth Refractor is a versatile and easy-to-use telescope designed for exploring scenic daytime
vistas as well as scanning the night skies for celestial treasures.
These instructions will help you set-up, properly use and care for your instrument. Please read them
over carefully before getting started.
Figure 1. Included parts of the VersaGo E-Series Mount
A
B
C
D
Plastic disk
E
F
G
H
I
J
