8
Orion
®
Telescopes & Binoculars
Corporate Offices: 89 Hangar Way, Watsonville CA 95076 - USA. Customer Support:
www.OrionTelescopes.com/contactus
Copyright © 2018 Orion Telescopes & Binoculars. All Rights Reserved. No part of this product instruction or any of its contents may be
reproduced, copied, modified or adapted, without the prior written consent of Orion Telescopes & Binoculars.
One-Year Limited Warranty
This Orion product is warranted against defects in materials or workmanship for a period of one year from the date of purchase.
This warranty is for the benefit of the original retail purchaser only. During this warranty period Orion Telescopes & Binoculars will
repair or replace, at Orion’s option, any warranted instrument that proves to be defective, provided it is returned postage paid.
Proof of purchase (such as a copy of the original receipt) is required. This warranty is only valid in the country of purchase.
This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mishandled, or modified, nor does it apply
to normal wear and tear. This warranty gives you specific legal rights. It is not intended to remove or restrict your other legal rights
under applicable local consumer law; your state or national statutory consumer rights governing the sale of consumer goods
remain fully applicable.
For further warranty information, please visit www.OrionTelescopes.com/warranty.
Specifications
CC6 CC8
Optical configuration:
Classical Cassegrain
Classical Cassegrain
Primary mirror figure:
Paraboloid
Paraboloid
Secondary mirror figure:
Hyperboloid
Hyperboloid
Mirror material:
Quartz (SiO2)
Quartz (SiO2)
Mirror coating:
Enhanced, 96% with SiO2 overcoat
Enhanced, 96% with SiO2 overcoat
Focuser:
Dual-speed (10:1) Crayford, 2" (with 1.25" adapter) Dual-speed (10:1) Crayford, 2"(with 1.25" adapter)
Drawtube travel:
41mm (laser-engraved millimeter scale)
50mm (laser-engraved millimeter scale)
Baffles:
8 internal knife-edge baffles
11 internal knife-edge baffles
Optical tube material:
Rolled steel
Rolled steel
Aperture:
152mm (6")
200mm (7.9")
Focal length:
1836mm
2400mm
Focal ratio:
f/12
f/12
Secondary mirror diameter: 50mm
60mm
Central obstruction:
58.5mm (38%, linear)
68.5mm (34%, linear)
Backfocus distance:
157.2mm (from end of 2" focuser collar)
166mm (from end of 2" focuser collar)
Mounting plate:
V-style mounting plate
D plate (bottom); V-style plate (top)
Finder scope base:
Two dovetail bases
Two dovetail bases
Tube length:
20.5" (including focuser)
25" (including focuser)
Extension rings:
One 2" ring and two 1" rings
One 2" ring and two 1" rings
Weight:
12 lbs.
18 lbs. 4 oz.
