background image

One-Year Limited Warranty

This Orion SpaceProbe 130mm Equatorial Reflector is warranted against defects in materials
or workmanship for a period of one year from the date of purchase. This warranty is for the
benefit of the original retail purchaser only. During this warranty period Orion Telescopes &
Binoculars will repair or replace, at Orion’s option, any warranted instrument that proves to be
defective, provided it is returned postage paid to: Orion Warranty Repair, 89 Hangar Way,
Watsonville, CA 95076. If  the product is not registered, proof of purchase (such as a copy of
the original invoice) is required.

This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mis-
handled, or modified, nor does it apply to normal wear and tear. This warranty gives you
specific legal rights, and you may also have other rights, which vary from state to state. For
further warranty service information, contact: Customer Service Department, Orion
Telescopes & Binoculars, P. O. Box 1815, Santa Cruz, CA 95061; (800) 676-1343.

9. Specifications

Optical tube: Steel

Primary mirror diameter: 130mm

Primary mirror coating: Aluminum with silicon monoxide (SiO) overcoat

Primary mirror figure: Parabolic 

Secondary mirror minor axis: 37mm 

Focal length: 650mm

Focal ratio: f/5

Focuser: Rack and pinion, accepts 1.25" eyepieces

Eyepieces: 25mm and 10mm Explorer II, fully coated, 1.25"

Magnification: 26x (with 25mm), 65x (with 10mm)

Finder scope: 6x magnification, 30mm aperture, achromatic, crosshairs

Mount: German-type equatorial

Tripod: Aluminum

Motor drives: Optional 

Weight: 28.4 lbs (tube 6.9 lbs, mount 21.5 lbs)

1-year Limited Warranty

Orion Telescopes & Binoculars

Post Office Box 1815, Santa Cruz, CA 95061

Customer Support Help Line (800) 676-1343 • Day or Evening

Summary of Contents for SpaceProbe 130ST EQ 9007

















Reviews: