7
OrionWelders.com
ch
.
1
CHAPTER 1: WELDER SETUP & ASSEMBLY
What is in the Box
A video explanation of these items below can be found at
http://www .orionwelders .com/
resources/orion-c-series-resources/
The Orion 100c will arrive in 2 boxes .
BOX 1:
(1) User Manual & Quick Start/Quick Settings Guide
(1) Orion 100c Power Supply
(1) Welder Power Cord
(1) Stylus Hand Piece
(2) Alligator Clips
(1) Foot Pedal
(1) Shielding Gas Hose
(1) Cross Lock Tweezers
(1) Electrode Vile (5 – 0 .5mm and 5 – 1 .0mm Electrodes)
(1) Fiberglass Brush
BOX 2 - IF YOU PURCHASED THE BASE MICROSCOPE SYSTEM:
(1) Base Microscope
(1) Base Microscope Power Cord
(2) Microscope Eye Piece Shields
(1) Green System Cover
BOX 2 - IF YOU PURCHASED THE MICROSCOPE ARM SYSTEM:
(1) Orion 100c Microscope Arm
(1) Microscope Arm Table Mount
(1) Microscope Arm Support Bar
(1) Set of Allen Wrenches
(2) Microscope Eye Piece Shields
(1) Green Cover
(1) Brass Lined Pliers
BOX 2 – IF YOU PURCHASED THE DARKENING LENS SYSTEM:
(1) Base Plate and Phillips Screw
(1) Base Plate Stand and Cap
(1) Darkening Lens
(1) Darkening Lens Arm
(1) RJ45 Darkening Lens to WelderCable
(1) Setup Sheet