background image

INSTRUCTION MANUAL

IN 667 11/21

#52599

#52598

Corporate Offices:

 89 Hangar Way, Watsonville CA 95076 - USA

Toll Free USA & Canada:

 (800) 447-1001 

International:

 +1(831) 763-7000

Customer Support:

 support@telescope.com

Copyright © 2021 Orion Telescopes & Binoculars. All Rights Reserved. No part of this product instruction or any of its contents 

may be reproduced, copied, modified or adapted, without the prior written consent of Orion Telescopes & Binoculars.

A N   E M P L O Y E E - O W N E D   C O M P A N Y

Orion

® 

SkyScanner BL 102mm and 135mm 

Dobsonian Reflector Telescopes

#52598 SkyScanner BL 102mm

#52599 SkyScanner BL 135mm

Congratulations on your purchase of the Orion SkyScanner BL Dobsonian Reflector telescope.

 

Your new SkyScanner BL Dobsonian Reflector Telescope is designed for easy yet eye-opening explora-
tion of the heavens. If you have never owned a telescope before, we would like to welcome you to amateur 
astronomy. Take some time to familiarize yourself with the night sky. Learn to recognize the patterns of 
stars in the major constellations. With a little practice, a little patience, and a reasonably dark sky away from 
city lights, you’ll find your telescope to be a never-ending source of wonder, exploration, and relaxation.
These instructions will help you set up and use your SkyScanner BL telescope. Please read them thor-
oughly before getting started. Please save all original packaging. This will help protect your SkyScanner BL 
in the unlikely event to need to return it.
The list of Included Items and the Assembly instructions are provided separately for the SkyScanner BL 
102 and the SkyScanner BL 135. Please refer to the relevant sections for your particular telescope.

Summary of Contents for 52598

















Reviews: