Orion 52598 Instruction Manual Download

Page: 2 / 16

SkyScanner BL 102

Included Items

Unpack and identify all included items, using the list below and

Figure 1

for reference.

•  SkyScanner BL 102mm optical tube
•  Red dot finder scope
•  25mm Kellner eyepiece
•  10mm Plossl eyepiece
•  3x Barlow lens

• MoonMap 260
• Bottom ground plate (with feet and azimuth axis bolt

pre-installed)

•  Top ground plate
•  Side panel
•  Side brace
•  Eyepiece rack
•  Assembly screw (x7)
•  Tension knob (x2)
•  Spring washer (x2)
•  Flat washer (x2)
•  Screwdriver (with interchangeable flat and Philips bit)
•  Dust cap

Dust cap

Optical tube

Tension knob

Eyepiece rack

Bottom

ground

plate

Top

ground

plate

Flat

washers

Spring

washers

25mm Kellner

eyepiece

3x Barlow lens

Red dot scope

10mm Plossl

eyepiece

Assembly

screws

Side brace/

handle

Side panel

Screwdriver

Figure 1.

Parts of the SkyScanner BL 102mm Dobsonian.

Warning: Never look directly at the Sun through

your telescope—even for an instant—without a

professionally made solar filter that completely

covers the front of the instrument, or permanent

eye damage could result. Young children should

use this telescope only with adult supervision.

Summary of Contents for 52598

















Search results

Summary of Contents for 52598

Reviews:

Related manuals for 52598

Brands by name

Popular brands

Orion 52598, Instruction Manual

Search results

Summary of Contents for 52598

Reviews:

Related manuals for 52598

Brands by name

Popular brands