Orion 52598 Instruction Manual Download

Page: 9 / 16

Figure 23.

The red dot scope superimposes a red LED dot onto

the night sky, showing right where your telescope is pointed.

Figure 26.

Megrez connects the Big Dipper’s handle to it's “pan”.

It is a good guide to how conditions are. If you can not see Megrez

(a 3.4 mag star) then conditions are poor.

Figure 24.

To change the red dot scope’s CR2032 battery, pull

down the battery cover and remove it.

Figure 25.

Remove the old battery and place a new CR2032

battery under the spring tab, with the positive (+) side of the battery

facing the tab.

Figure 27.

The included 3x Barlow lens is inserted between the

focuser and the eyepiece, as shown here.

Figure 28.

Orient the optical tube horizontally for collimation, and

place a piece of white paper inside the tube opposite the focuser.

Spring tab

CR2032 battery

Eyepiece

3x Barlow lens

Secondary mirror

collimation screws

Battery cover

Summary of Contents for 52598

















Search results

Summary of Contents for 52598

Reviews:

Related manuals for 52598

Brands by name

Popular brands

Orion 52598, Instruction Manual

Search results

Summary of Contents for 52598

Reviews:

Related manuals for 52598

Brands by name

Popular brands