28
MIS-4220 / MIS-4220R / MIS-4230
29
Infinitely Expandable
Main Image of MSCS (Multi Screen Control system)
5.2. Start MSCS
MSCS is an application program needed to control MPDP.
y
When you execute MSCS (v 4.0) for your product at the installation screen, it will create a new folder
y
at C:\Program File\MSCS (v4.0) and an icon on your computer screen.
By double clicking the MSCS (v 4.0) icon, the initial screen image of MSCS (v 4.0) will be
y
displayed as shown in the picture.
※
InputsourceisnotdisplayedontheMSCSscreen,butitisindicatedbycolors.
※
DVI:Yellow,PC:Green,DTV:Pink,DVD:Purple,S-VIDEO:Brown,VIDEO:Gray
5.3. Setting 'Com Port'
Com Port connects or disconnects the communication between PC and MPDP.
y
Connect MPDP to PC Com Port via RS-232C cable.
y
Go to MSCS Menu → Communication and set Com Port. Click 'Connect' using mouse or press 'Ctrl+C'
y
using keyboard.
In order to disconnect communication, click 'Disconnect' using mouse or press 'Ctrl+D' using keyboard.
y
When you use USB-to-RS232C converters, you need to set Com Port again, because MSCS uses one
y
of Com Port no. 1 to 30.
5.4. "new design/Last design" setting
When Com Port is successfully connected, pop-up window for "New design/Last design" appears.
Click "Open New Design" to prepare new configuration.
y
Click "Open Last Design" to go to last design before closing.
y
New/Last Design Set
Communication Setting
Downloaded From TV-Manual.com Manuals
