36
MIS-4220 / MIS-4220R / MIS-4230
37
Infinitely Expandable
5.11. Screen Control
Register values related to display of MPDP can be changed.
y
Click "Picture Control" of "Control" menu bar or enter "Ctrl+P" in order to run "Picture Control" window.
y
In order to control display values, input values directly in "Edit Box" and press Enter key.
y
Or click -/+ button using mouse.
Click "Exit" button or press "Ctrl+X" using keyboard to close "Picture Control" window.
y
Color Temp.
y
Normal:Initialsetting.Properfornormalvideoimageview.
-
Studio:LowColortemperature.Properforbroadcastingpurpose.
-
Picture Control
Go to "Control" in menu bar → PC Tracking → Auto in order to run "Tracking Auto" window.
y
In case alignment doesn't work through "Tracking Auto" command,
y
users can tune finely through "Tracking Manual". Go to "Control" of
menu bar → PC Tracking → Manual or press "Ctrl+M" using keyboard.
"Tracking Manual" window enables users to set Frequency, Phase,
y
LineStart and PixelStart.
When "Tracking Manual" window is on display, users cannot display
y
"Picture Control" window.
Even when "Tracking Manual" window is on display, selecting 'ID' is
y
available by clicking right button of mouse.
(Refer to "5.5 PDP ID Setting".)
Detail adjustment steps are as follows.
y
1) Tune "Phase" until the vertical lines are clearly adjusted..
2) Tune "LineStart" to adjust vertical alignment. "PixelStart" for horizontal alignment.
3) Adjust "Frequency" if alignment is still wrong.
If you adjust "Frequency", repeat step 1) and 2) to fit alignment.
Adjustable range is as follows
-The range of "Frequency" you can adjust is -50 to 50
-The range of "Phase" you can adjust is 0 to 31
-The range of "Linestart" you can adjust is -23 to 10
-The range of "Pixelstart" you can adjust is -50 to 40
Click "Exit" button or press "Ctrl+X" using keyboard to close "Tracking Manual" window.
y
5.12. PC Tracking
Alignment adjustment is available when input source is PC.
y
Tracking Manual Window
Downloaded From TV-Manual.com Manuals