SCALE OPERATION
·Time Setting
Insert the Lithium battery to the battery cave (Note: Make sure battery is pushed all
the way into its slot. Also make sure + side of battery is facing out).After hearing the
sound “di” it will be turn on automatically and the time will show ‘12:00’. Place the
scale on a hard flat surface and press the function key “Mode/set” for a moment,
the sound
di
means that it come to the time setting state. The first two digital are
for hour and the last two are for minute. Press the key “Push” to set the data and
“Mode/Set” to set the minute, finally press “Mode/set “to confirm your data.
·Time Count Down Setting
Press the key “Mode/set”, when it shows “00:00” and then press the key “Mode/set”
for a moment, the sound
di
means that it come to the time count down setting
state. The first two digital are for minute and the last two are second. And press the
key “Push” to set your data and “Mode/set” to confirm. The time is counting down,
when you hear the sounds ‘di-di-di’.
·Weighing Setting
1. Press the key “Z/T” once to come to the weighing state.
2. When the LCD shows Zero, put the container (bowl) on the scale, then LCD will
show the weight of container (bowl).
3. Press the key “Z/T” again, then put the article into container (bowl), it will clear
the weight of the container (bowl), and display the weight of food.
4. Finally you can press the function key “Z/T” again to return Zero.
·Unit Setting
Press the key “Unit” to change G/KG
Usage Notes:
·When the display shows ”Err”, it means that the scale is overloaded..
·When the display shows ”+/ -”, it means that the battery is low. Please replace the
battery as soon as possible.
·Do not use the wet dishcloth to clean the scale
·Do not overload the scale
Subject to change without notice
Extra information on ORION company web-site
www.orion.ua
We take your opinion and offers by E-mail
support@orion.ua
