27
No Disc
Reading
PLAYBACK PROCEDURE
6
On the TV-screen, “No Disc”
changes to “Reading” and
then playback commences.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
1
Press
TV/DVD
to select
DVD mode.
2
3
Press
/
or
/
to make a selection.
4
Press
ENTER
.
• Title is selected and play commences.
5
Press
STOP
to end playback.
• The unit memorizes the stopped point, depending on the
disc. “
” appears on the screen. Press
PLAY
to resume
playback (from the scene point).
• If you press
STOP
again or unload the disc (“ ” appears
on the screen.), the unit will clear the stopped point.
7
To stop the playback, press
STOP
.
Then press
(EJECT)
.
Remove the disc and press Power .
The unit turns off.
NOTES:
• If a non-compatible disc is loaded, “Incor-
rect Disc”, “Region Code Error” or “Paren-
tal Error” will appear on the TV screen ac-
cording to the type of loaded disc. If these
appear, check your disc again (see pages
24 and 40).
• Some discs may take a minute or so to
start playback.
• If you insert a disc with the label facing
away from you (ie. the wrong way around),
“Reading” will appear on the display for
about 5 seconds and then “No Disc” or
“Incorrect Disc” will be displayed.
• Some playback operations of DVDs may
be intentionally fixed by software produc-
ers. Since this unit plays DVDs according
to the disc contents the software produc-
ers designed, some playback features
may not be available. Also refer to the in-
structions supplied with the DVDs.
Place the disc in the disc
slot with the label side
facing forward. (If the disc
has a label.) Hold the disc
without touching either of
its surfaces, align it with
the guides, and place it in position.
Summary of Contents for TELETEXT 14LD
Page 51: ...49...
