Importeur:
AIC International - 44980 Ste Luce sur Loire - France
Failure index :
Difficulty
Procedures:
I am unable to access
any of the clock
functions
The clock is in radio-controlled signal receiving mode: the aerial on the top
right is flashing.
Wait until the signal is received (clock setting the correct time).
My clock is not
receiving a signal
Poor reception may be caused by local factors:
-
Interference from household appliances with no anti-interference
devices
-
Distance of less than 2 m from a TV or radio, etc.
-
High-frequency emission devices (e.g.: a PC)
-
Building with a steel structure
-
More than 1,500 km away from the emitter station,
-
Long waves may be the cause of poor reception if topographical and
meteorological conditions are poor
You should reinitiate the signal
– refer to settings above
Second hand
doesn’t
run anymore or clock
gets late
Battery must be used : replace battery by new AA/LR6 battery into
battery compartment N°1 (meet the right polarity). Clocks will search
automatically radio-controlled signal (refer to settings above)
Digital display is low
Battery must be used : replace battery by new AA/LR6 battery into
battery compartment N°2 (meet the right polarity). Refer to settings
above for calendar settings.
NB : Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning
chemical waste.
The product constitutes the applicable product according to the WEEE and ROHS directives ; when discarding the unit, comply with
local rules or regulations.
