background image

IM0973112 A 07

Installation Manual

Camera AFZ Sst; Art. no. 0103482

Camera AFZ Sst RS485; Art. no. 0113482

Camera AFZ PAL HW; Art. no. 0103513

Camera AFZ PAL Serial; Art. no. 0103532

Camera AFZ PAL Serial RS485; Art. no. 0113532

Camera AFZ NTSC Serial; Art. no. 0103562

Safety

In order to guarantee safe operation, these safety instruc-

tions must be read before you start using this equipment.

 • Do not open the enclosure. The camera is pressurised. This can cause  

  damage, short-circuiting or electrical shocks.

 • Do not expose the equipment to extreme temperatures. This can cause  

  deformation of the enclosure or damage to internal components.

 • Repairs or adjustments to the equipment may only be undertaken by  

 Orlaco.

 • The equipment must be assembled as shown in this manual.

 • If there have been alterations or changes to this equipment that have  

  not been specifically approved by Orlaco, use of this equipment is not  

 permitted.

Before you start using this equipment, please read this manual carefully 

and follow all instructions. This installation manual describes the func-

tions of the equipment, outlines the connection options and explains how 

to put the equipment into operation. We recommend that you keep this 

manual in a safe place for reference purposes.

If you have any questions or issues concerning the operation of this 

equipment, consult the relevant section in the manual or contact the 

Orlaco Products BV Service department.

The camera and monitor systems from Orlaco comply with the latest CE, 

ADR, EMC and mirror-directive regulations. All products are manufac-

tured in accordance with the ISO 9001 quality management, IATF16949 

quality automotive and ISO 14001 environmental management.

Contents  

Page

1.

 Introduction 

3

2.

 Mounting  

3

3.

 Operation  

3

3.1. 

Overpressure in the enclosure 

3

3.2.

 Valve   

3

3.3.

 Switching on and off 

3

4.

 Electrical installation 

4

4.1.

 Camera 

4

4.2. 

Supplied cable 

4

4.3.

 Camera 

5

Technical specifications 

6

6.

 Dimensions 

7

7. 

Pelco-D commands

 8

8. 

Jittter 

 10

9. 

Maintenance and cleaning

 10

10. 

Disposal

  

10

11. 

General terms and conditions

 11

12. 

Release notes

 11

Available documentation

DS0961340-0103482 Camera AFZ Sst (0113482)

DS0961301-0103513 Camera AFZ PAL HW

DS0961331-0103532 Camera AFZ PAL Serial (0113532)

DS0961332-0103562 Camera AFZ NTSC Serial

Art. no.

0103532/0113532/0103562

Art. no. 0103482/0113482

Art. no. 0103513

Summary of Contents for 0103482













Reviews: