24
IM0973270 A 09
Article number: 0208871
Cables / Connectors
6m power cable open wired, 6m video cable with 7p molded M16 female connector;
Art. no.:8976331.
Bracket
A clamping user-adjustable mounting bracket is supplied. Art. No. : 2015500.
Weight
1,9kg (Monitor, bracket, cables and connectors).
back side
cable connection
downwards
cable connection
upwards
remove cap
Note by reassembly: Make
sure to tighten the screws
according torque 0.25 Nm / 35.4 in.ozf
Connections to the monitor: (Secure the power input with a 5A fuse)
1 = Red
= Power input: 12...60V/DC
2 = White
= Power input: 0V
3 = Blue
= Cam No. 1 activated at 7...60V/DC*
+ Activation Radar on sensor direction 5,6 and 7
4 = Brown
= Cam No. 2 activated at 7...60V/DC*
+ Activation Radar on sensor direction 1,11 and 12
5 = White/Yellow = Cam No. 3 activated at 7...60V/DC*
6 = Grey
= Cam No. 4 activated at 7...60V/DC*
+ Blocking sensor directions 2,3,4 and 8,9,10
7 = Yellow
= Quad view, Parking Brake (only Front Cam)/Zoom out
*Triggers camera >7V/DC and returns to non triggered <5V/DC.
If multiple cameras are triggered the highest camera number has the highest priority.
Front side 7p molded female connector:
1 = Coax core
= Video in
2 = Coax shielding = Video GND
3 = Red
= Power output: equal to “Power input”
4 = Black
= Power output: 0V
5 = Orange
=
CAN-L
6 = Yellow
=
CAN-H
7= Grey
= N.C.
1
2
3
7
4
56
2
5
7
4
3
6
1
units in mm
6000
120
,0
98,3
49
,1
89
,6
30,0
∅
64,5
40,5
∅
7,0 (4x)
64,0
188,0
Min. bend radius= 50mm
R = 50
97,6
Controller Area Network (CAN)
Pair of signal wires (CAN_H and CAN_L)
Connect instructions:
Please refer to your Orlaco system documentation or chapter 2. “Basic System Installations”
User instructions:
Please refer to User manual no: UM0972080 for operation.
Installation manual
