Page 6 of 48
GENERAL INSTRUCTIONS FOR PF
MODULAR ENCLOSURES FOR
TRANSFORMER SUBSTATIONS
IG-021-GB
version 07
29.08.2008
b)
Vertically-transported components
Front and side panels
[1]
, PF-2015 / 3015 series bottom plates and the remaining floor
plates are transported on trestle (
reference 160026
), as shown in figure 2.3. On
occasions, floor plates can be transported horizontally.
The load is tied down on the truck using slings or cables that are tensed using the truck’s
reels. In turn, the concrete components have rubber and/or metal protection parts, as
shown in figure 2.4, to avoid any damage as the straps are tightened.
Figure 2.3:
Trestle160026
Figure 2.4:
Protection parts
Figure 2.5:
Vertically-transported components
[1]
If the front and rear panels are transported vertically, instead of horizontally, they can be moved directly from
the truck to their final positions.
IMPORTANT:
Before unloading, check the orientation of the loaded components. This will make unloading
and assembly easier.
