IG-284-EN version 03; 06/05/2020
12
Handling and transport
General Instructions
cgm
.800: Medium-voltage switchgear with integrated insulation in SF
6
gas
up to 36 kV in accordance with IEC Standard with rated current up to 800 A
2. Handling and transport
[3]
Position the rear of the cubicle facing the driver, to avoid damaging the front.
Important:
During transport, the switchgear must
be perfectly seated and fixed so that it cannot move
about and possibly damage the equipment.
2.1. Lifting means
The switchgear must always be kept upright, directly on the
ground or on a pallet depending on the type of handling
involved.
To handle assemblies of up to four
cgm
.800 functional
units, one of the following methods must be used:
1. Using a forklift truck or hand-operated pallet
truck
.
[3]
Figure 2.1.
Lifting a
cgm
.800
modular cubicle using a fork-lift truck.
2.
Lifting using slings or chains fixed to the lifting brackets
on the sides of the top of the cubicle. The angle of pull
should be as vertical as possible (with an angle greater
than 60º from the horizontal).
Figure 2.2.
Lifting a
cgm
.800
modular cubicle with chains.
Summary of Contents for velatia cgm.800
Page 71: ......
