IG-156-EN version 04; 25/01/19
32
Checking and modifying parameters using the keypad
General instructions
ekor.ccp
6. Checking and modifying parameters using the keypad
When on standby, the display on the ekor.ccp unit remains
switched off
To activate the display, press any of the buttons, accessing
the general information screen.
Figure 6.1.
Standby status of the
ekor.ccp
unit
6.1. Screens in graphic mode
Operation in graphic mode is based on the function
buttons. The function of each button is explained in text
next to each one, and may be diff erent depending on the
screen in question.
1. General information
This screen informs about the general status of the substation:
status of the switches, presence/absence of voltage, action of
protection relays, measurements, etc.
Furthermore, it is possible to access the remaining information
on the installation using the display option selection keypad
on this screen: Alarms, measurements, statuses.
Figure 6.2.
General information screen
2. Selected cubicle
The selected cubicle screen displays the full name of the
cubicle, the name and status of the cubicle driving mechanism
and the diagram of the cubicle with its indicators and names.
In substations with measurements, there is a second cubicle
screen that displays all of the measurements for that cubicle.
Operations on the selected cubicle are also possible from this
screen.
Figure 6.3.
Selected cubicle screen
