37 Checksum error chipcard:
->
Replace the chipcard (Pos. 21)
38 Unknow chipcard error:
->
Replace the hand held programming unit (Pos. 20)
39 A chipcard of another ARTROMOT® product got
used:
->
Format the chipcard; Press START
->
Replace the chipcard (Pos. 21)
40 Unkown chipcard:
->
Replace the chipcard (Pos. 21)
41 Chipcard is missing:
No chipcard is insert
->
Insert a chipcard
->
Replace the chipcard (Pos. 21)
42 Chipcard write error:
The chipcard is not writable
->
Replace the chipcard (Pos. 21)
->
Replace the hand held programming unit (Pos. 20)
43 Chipcard read error
Chipcard is not readable.
->
Replace the chipcard (Pos. 21)
->
Replace the hand held programming unit (Pos. 20)
44 Chipcard verify
:error
->
Replace the chipcard (Pos. 21)
->
Replace the hand held programming unit (Pos. 20)
45 Wrong product combination:
Mixup between non compatible device and hand held
programming unit
->
Use the correct hand held programming unit (Pos. 20)
46 Handset error internal communication:
Invalid interchip communication inside the hand held
programming unit
->
Replace the hand held programming unit (Pos. 20)
47 Internal communication error motor control:
Internal communication error motor control.
->
Replace motor control (Pos. 25)
48 User stoped the special function
4
49 Unknown error in the motor control:
->
Replace motor control (Pos. 25).
Chipcard is missing
->
Insert a chipcard
->
Replace the chipcard (Pos. 21)
Chipcard error
->
Replace the chipcard (Pos. 21)
->
Replace the hand held programming unit (Pos. 20)
3.2 Mechanics
The movable screws should not be completely unscre-
wed when adjustments are being made. Make sure
that the movable screws are tightened for operation
and transport.
The frame is unstable:
Possible cause: Bolt / screws missing or loose. Tighten
the screws / bolts.
3.3 Others
Do not clean the housing or the support with grease or
oil.
No solvents may be used when cleaning the
ARTROMOT®-K1.
