11
- Visitor user ID: 990~999
Users can be added consecutively without having to leave programming mode.
Manual assignment of user ID number
(Main user define a specific user ID)
1 User ID # Scan fingerprint Scan fingerprint Scan fingerprint
Users can be added consecutively without having to leave programming mode.
Add card user
Automatic assignment of user ID number
(the device assign next available user ID number)
1 Read card/input card number #
Users can be added consecutively without having to leave programming mode.
Manual assignment of user ID number
(Main user define a specific user ID)
1 User ID # Read card/input card number #
Manual assignment of user ID number
(allows Main user to ad dup to 988 cards in single step)
1 User ID # Card quantity # Read card 1/input card 1 number # Read card 2/input card 2 number
#
…
You need to read out/enter the numbers of all cards to be added one by one.
Add pin user
Automatic assignment of user ID number
(the device assign next available user ID number)
1 PIN code #
Users can be added consecutively without having to leave programming mode.
Manual assignment of user ID number
(Main user define a specific user ID)
1 User ID # PIN code #
Add Main user ID: 99
Add Main user ID number
1 99 # Scan fingerprint Scan fingerprint Scan fingerprint
Add panic user: 988, 989
Possible for card and PIN users
Assigning a panic user ID number
–
card opening
1 User ID # Read card/input card number #
Assigning a panic user ID number
–
PIN code opening
1 User ID # PIN code #
Add visitor user
–
ID visitor number: 990-999
Possible for card and PIN users, the main user can specify the exact number of entrances for the guest user (from 1-10).
Assigning a visitor user ID
–
card opening
1 User ID # 0-9 # Read card/input card number #
0-9 defines the number of entrances for a guest, where 0 means 10 entrances
Assigning a visitor user ID
–
PIN code opening
1 User ID # 0-9 # PIN code #
0-9 defines the number of entrances for a guest, where 0 means 10 entrances
Change PIN user
(PIN code must be 4-6 digits long excluding the combination 8888,
the operation must be performed outside the programming mode)
* User ID # Old PIN code # New PIN code # New PIN code #
Change PIN of card, PIN code opening
(automatically assigned PIN is 8888)
* Read card # Old PIN code # New PIN code # New PIN code #
Add user with Main user (scan fingerprint/read Main card)
Add user
–
card, PIN code or fingerprint opening
1. Scan Main fingerprint or Read Main card
2. Scan fingerprint/Read card/ input PIN code the user you want to add
–
repeat it 3 times #
To add more users, repeat step 2.
3. Scan Main fingerprint or Read Main card
Delete users
Delete user by fingerprint/card/PIN code
2 Scan fingerprint or Read card or input PIN code #
Users can be deleted consecutively without having to exit programming mode.
Delete user by ID numbers
2 User ID #
Delete user by card number
2 Input card number #
Delete all users
2 Main code #
Delete user with Main user (scan fingerprint/read Main card)
Delete user
–
fingerprint/card/PIN code opening
1. Scan Main fingerprint or Read Main card
–
twice and hold for 5 seconds
2. Scan fingerprint/ Read card/input PIN code the user you want to delete #
To delete more users, repeat step 2.
3. Scan Main fingerprint or Read Main card
Door opening - settings
Electric door strike release time adjustment - pulse mode
3
1~99
#
default setting
Define the time for which the electric door strike is released (1-99sec), the default setting is 5sec
Electric door strike release time adjustment - toggle mode
3
0
#
Fingerprint access
4
0
#
Card access
4
1
#
PIN access
4
2
#
