INSTALLATION GUIDE
Compact Series
MODEL
OD
C
-
1008 | ODC-8003
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
info@ortechindustries.com
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
P
lan the Installation
1. DO NOT use in a cooking area
2. Two ways to connect ductwork to a factory-shipped unit
Assembly Instructions
1.
Mount Housing to Joist or I-joist
a)
Hold the housing so that it is in contact with
the
bottom of the joist
b)
Attach the housing with four (4) screws to the joist
through
the holes in each mounting flange
2.
Mount
with
Mounting Holes and Hanger Bar
a)
Slide
one hanger bar into the channel on the housing and
adjust as needed to fit between framing
b) Hold housing in place so that the housing contact the bottom of
the joist. Screw housing to joist through the hole of the housing
c) Screw the hanger bar onto the other side of joist through the hole
d) Screw hanger bar to housing with screw
e) Refer to the diagram on the right
a) Slide one hanger bar into channel on the housing and
adjust as needed
b) Hold housing in place so that the housing contacts
the bottom of the joist
c) Screw housing to joist through the hole of the housing
d) Screw the hanger bar onto the joist through the hole
e) Screw hanger bar to housing with screw
3. Mount
to I-joist