1. INTRODUCTION
Thank you for purchasing the
Wireless Keypad.
This User’s Manual contains information that will
help to operate the keypad as well as answer
questions about certain special keys and buttons.
Please keep this manual in a safe place for future
reference.
2.
System Requirements
Microsoft Windows
®
2000/XP/Vista/7/8
3. Installation
Connect the receiver to PC USB port.
“New Hardware Found” will display.
Place the battery to keypad and turn it on.
Start using the Wireless Keypad.
Note: After 5 minutes non-operation, the keypad
will go to low-power mode. Please press any key
to wake up.
4.
Power Switch
There is a power switch at back of the keypad.
When not in use, please turn to OFF to save
battery power.
